Skip to content

6 Mold Remediation Steps – How Mold Affects Our Health?

Knowing how to deal with mold will keep your house clean and fresh while protecting your family's health. Let's discover 6 mold remediation steps below.

IAQ Boost is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Mold is a major nuisance to many homes. It damages household items and gradually destroys walls. Even worse, mold with its bad odors also causes allergies and other diseases that are not good for health. So how to deal with this annoyance? Below are 6 mold remediation steps.

Health Effects Of Mold

The most common symptoms of mold exposure are allergies and respiratory problems. It can lead to skin and eye irritation, causing swelling in exposed skin areas. In the long run, you are also more likely to experience asthma.

A stuffy nose, sore throat, and sneezing are frequent symptoms for those who are allergic to mold. It also entails additional signs such as fever, headaches, and even lung and digestive system malfunction.

People exposed can have more dangerous symptoms for poisonous mushrooms such as black mold. Persistent itching and coughing, lung infections, and vomiting are all severe indicators of exposure to poisonous fungal species. It will damage health in the long run.

mold remediation steps

6 Mold Remediation Steps

Below are 6-step mold remediation you wish to know sooner!

Doing A Prepare Work 

The first step of mold clean up procedures is putting on an outfit that can be thrown away after cleaning. Gloves with anti-pollution faces are essential, especially for people who are sensitive to mold. Make sure it won’t stick to your skin while you’re cleaning.

You should prepare your home and control the air in the house by turning off all heating and air conditioning equipment. Close windows and ventilation devices to prevent wind from blowing during mold treatment.

It would be best to moisten the contaminated areas using a spray bottle. Prepare tools to hold the dust when prying it out from the wall. You can also use a vacuum cleaner to suck up dry mold patches. Remember to keep your feet dry when doing these safety precautions.

Isolating The Polluted Zone

The next step in the mold mitigation process is to isolate the moldy zone, preventing it from spreading to other areas. It also makes it easier to deal with mold. You can use tape to fix the mold or use plastic sheets to seal the moldy walls. 

Air purifiers are often used to remove dirt from the air while cleaning. Besides the visible mold stains, it also exists in the nooks and crannies of the house. 

Therefore, you need to check carefully, from the ceiling, the door slot, especially the wet areas. Only in this way can mold growth be prevented.

mold mitigation process

Removing Moldy Materials

After fixing moldy areas in your home, you should check for moldy utensils and items and remove them. Boards and carpets are very susceptible to mold. You can use a fogger to spray the surface of the planks and carpets to prevent the growth of it.

To get rid of moldy items, you should wrap them in plastic, cover them with duct tape, and throw them away. In the meantime, be sure to turn on air purifiers and ventilators to get rid of mold particles in your home.

Moistening And Cleaning

For moldy floor or wall surfaces, you should moisten them with water and then scrub them. Use a water and bleach mixture or mold cleaner to scrub the dirty area. After scrubbing, let it dry and wipe the surface again with a towel.

An extremely important stage of cleanup steps is to seal the musty zones after treating them. It will prevent mold from appearing later and keep floors and walls looking new.

Areas that have just been treated for mold should be allowed to dry out after 3 days. Check to see if it comes up again. If not, you should proceed with painting to seal the area. Latex paint is often preferred because it contains mildewcide.

cleanup steps
cleanup steps

Repairing Mold-Damaged Materials

After you have treated the contaminated areas in your home, you should check and repair the items in your home that are damaged by mold.

When you finish cleaning and mending, it’s frequently difficult to choose which objects should be saved and which should be discarded. Plastic, glass, and metal items are frequently kept and reused. Clothes that have been disinfected can be worn once more. If you’re allergic to mold, though, it’s preferable to buy new.

Final Testing

After completing the above mold remediation process steps, you should do a thorough inspection of your entire home. Air quality and humidity must be kept at an absolute minimum. Mold may easily grow on the floor and the walls. Therefore, they require the most comprehensive check-up.

Mold Remediation Vs. Mold Removal

The main difference between mold removal and remediation is determining the mold’s source. While the removal process focuses solely on removing mold present in the home, remediation aims at removing mold from the root.

Mold remediation procedures include the removal of airborne mold particles and the identification and treatment of fungal areas thoroughly. In addition, the inspection stage is also carefully performed to avoid the return of mold.

A complete mold remediation process keeps your family away from potential mold hazards. Since the treatment takes longer than simply removing it from your home, you can rest assured that it will be less likely to revive if you know how to clean your home properly.

Mold remediation procedures
Mold remediation procedures


Through 6 mold remediation steps above, you probably know how to deal with mold thoroughly. All you need is to moisten and rub on moldy surfaces and remove mold-damaged items. Finally, you should check the air quality and repaint the affected areas.

Thank you for taking the time to read this article. See you in the next post!


Featured on

Yahoo News